Pwd - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

File Management Commands

pwd

Displays the switch's current working directory.
pwd
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 6855, 9000E
Usage Guidelines
This command can also be used on the secondary CMM.
Examples
-> pwd
/flash
Release History
Release 6.1; command was introduced.
Related Commands
cd
mkdir
rmdir
ls
dir
MIB Objects
systemServices
systemServicesWorkingDirectory
OmniSwitch CLI Reference Guide
Changes the switch's current working directory.
Creates a new directory.
Deletes an existing directory.
Displays the contents of a specified directory or the current working
directory.
Displays the contents of a specified directory or the current working
directory.
June 2012 page 58-5