Show Ntp Server Disabled-Interfaces - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

show ntp server disabled-interfaces

Displays the ip addresses of the interfaces on which NTP server is not enabled.
show ntp server disabled-interfaces
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 6855, 9000E
Usage Guidelines
This command displays ip interfaces on which currently NTP server functionality is disabled.
Examples
-> show ntp server disabled-interfaces
IP Address
--------------
172.23.0.202
10.255.24.120
output definitions
IP Address
Release History
Release 6.4.2; command was introduced.
Related Command
show ntp status
show ntp server status
MIB Objects
alaNtpAccessRestrictedTable
alaNtpPeerListAddress
page 56-38
Peer IP Address
Displays the information about the current NTP status.
Displays the basic server information for a specific NTP server or a list
of NTP servers.
Network Time Protocol Commands
OmniSwitch CLI Reference Guide June 2012