Show Ntp Server Status - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

show ntp server status

Displays the basic server information for a specific NTP server or a list of NTP servers.
show ntp server status [ip_address]
Syntax Definitions
ip_address
Defaults
N/A
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 6855, 9000E
Usage Guidelines
•
This command displays information on the status of any or all configured NTP servers/peers.
•
To display a specific server, enter the command with the server's IP address. To display all servers,
enter the command with no server IP address.
Examples
-> show ntp server status
IP address
Host mode
Peer mode
Prefer
Version
Key
Stratum
Minpoll
Maxpoll
Delay
Offset
Dispersion
Root distance
Precision
Reference IP
Status
Uptime count
Reachability
Unreachable count
Stats reset count
Packets sent
Packets received
Duplicate packets
Bogus origin
Bad authentication = 0,
Bad dispersion
page 56-30
The IP address of the NTP server to be displayed.
= 172.18.16.147,
= server,
= unspec,
= no,
= 4,
= 0,
= 16,
= 4 (16 seconds),
= 10 (1024 seconds),
= 0.000 seconds,
= 0.000 seconds,
= 0.000 seconds
= 0.000,
= -6,
= 0.0.0.0,
= not configured,
= 28250 seconds,
= 0,
= 5,
= 27829 seconds,
= 0,
= 0,
= 0,
= 0,
= 0
Network Time Protocol Commands
OmniSwitch CLI Reference Guide June 2012