Show Command-Log Status - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

show command-log status

Shows the current status of the command logging function (i.e., enabled or disabled). For more informa-
tion on enabling and disabling command logging, refer to the
show command-log status
Syntax Definitions
N/A
Defaults
Command logging is disabled by default.
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 6855, 9000E
Usage Guidelines
N/A
Examples
-> show command-log status
CLI command logging : Enable
output definitions
CLI command logging
Release History
Release 6.1; command was introduced.
Related Commands
command-log
show ssh config
MIB Objects
sessionCliCommandLogStatus
OmniSwitch CLI Reference Guide
The current status of command logging on the switch. Options include
Disable and Enable. Disable indicates that the command logging func-
tion is currently disabled (default). Enable indicates that the command
logging function has been enabled via the
For more information, refer to
Enables or disables command logging on the switch.
Displays the contents of the command.log file.
June 2012
command-log command on page
command-log
page 57-24.
57-24.
command.
page 57-51