Exit - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

exit

Ends the current CLI session. If the CLI session to the switch was via Telnet, the connection is closed.
exit
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 6855, 9000E
Usage Guidelines
If changes were made using the CLI and have not been saved with the
message appears asking to confirm the user exit. To save changes, enter N at the warning prompt and use
the reload issu command.
Examples
-> exit
Release History
Release 6.1; command was introduced.
Related Commands
kill
MIB Objects
SessionMgr
sessionIndex
sessionRowStatus
page 57-26
Kills an active session. The command takes effect immediately.
Session Management Commands
reload issu command, a warning
OmniSwitch CLI Reference Guide June 2012