history size
Sets the number of commands that will be stored in the CLI's history buffer.
history size number
Syntax Definitions
number
Defaults
By default, the history buffer size is set to 100 commands.
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 6855, 9000E
Usage Guidelines
N/A
Examples
-> history size 10
Release History
Release 6.1; command was introduced.
Release 6.1.5; history buffer size increased to 500.
Related Commands
show history
!
MIB Objects
N/A
OmniSwitch CLI Reference Guide
Enter an integer between 1 and 500. The history buffer can store up to
500 commands.
Displays commands that you have recently issued to the switch. The
commands are displayed in a numbered list.
Recalls commands listed in the history buffer and displays them at
the CLI prompt.
June 2012
page 57-19