Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual page 3501

output definitions (continued)
Ip Address
Read-only domains
Read-only families
Read-Write domains
Read-Write families
End-User Profile
Possible values for command domains and families are listed here:
domain
domain-admin
domain-system
domain-physical
domain-network
domain-layer2
domain-service
domain-policy
domain-security
Release History
Release 6.1; command was introduced.
Related Commands
whoami
kill
MIB Objects
SessionActive
sessionIndex
sessionAccessType
sessionPhysicalPort
sessionUserName
sessionUserReadPrivileges
sessionUserWritePrivileges
sessionUserProfileNumber
sessionUserIpAddress
sessionRowStatus
OmniSwitch CLI Reference Guide
User IP address.
The command domains available with the user's read-only access. See
the table beginning on
The command families available with the user's read-only access. See
the table beginning on
The command domains available with the user's read-write access. See
the table beginning on
The command families available with the user's read-write access. See
the table beginning on
The name of an end-user profile associated with the user.
families
file image bootrom telnet reset dshell debug
system aip snmp rmon webmgt config
chassis module interface pmm flood health
ip rip ospf bgp vrrp iprm ipx ipmr ipms
vlan bridge stp 802.1q linkagg ip-helper
ldap dhcp dns
qos policy slb
session binding avlan aaa
Displays current user session.
Kills another user's session.
June 2012
page 57-31 for a listing of valid domains.
page 57-31 for a listing of valid families.
page 57-31 for a listing of valid domains.
page 57-31 for a listing of valid families.
page 57-31