Show Ethoam Cfmstack - Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual

show ethoam cfmstack

Displays the contents of CFM Stack Managed Object, which determines the relationships among MEPs
and MIPs on a specific bridge port.
show ethoam cfmstack {port slot/port | linkagg agg_num}
Syntax Definitions
slot/port
agg_num
Defaults
N/A
Platforms Supported
OmniSwitch 6250-Metro Models
Usage Guidelines
N/A
Examples
-> show ethoam cfmstack port 1/3
Up MHF Configured:
Vlan-id: 100,
Direction: up,
MAC-Address: 00:D0:95:EC:84:B0,
Maintenance Association: alcatel-sales,
Maintenance Domain: esd.alcatel-lucent.com,
MD-level: 3
Down MHF Configured:
Vlan-id: 100,
Direction: down,
MAC-Address: 00:D0:95:F6:33:DA,
Maintenance Association: alcatel-sales,
Maintenance Domain: esd.alcatel-lucent.com,
MD-level: 3
output definitions
Vlan-id
Direction
MAC-Address
page 25-48
Slot and port number for which the contents of the configured MEP or
MIP will be displayed.
The aggregate ID for which the contents of the configured MEP or MIP
will be displayed.
The VLAN ID to which the MEP is attached.
Indicates the direction (Inward or Outward) of the Maintenance Point
(MP) on the Bridge port.
The MEP ID configured on this port.
OmniSwitch 6250 CLI Reference Guide
Ethernet OAM Commands
November 2009