Show Ethoam Default-Domain - Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual

show ethoam default-domain

Displays all the default MD information for all the VLANs or a specific VLAN.
show ethoam default-domain [vlan vlan_id]
Syntax Definitions
vlan_id
Defaults
By default, the default MD information for all VLANs is displayed..
Platforms Supported
OmniSwitch 6250-Metro Models
Usage Guidelines
Use the vlan_id parameter with this command to view information about the default MD for a specific
VLAN.
Examples
-> show ethoam default-domain
Vlan Mhf-creation
------+--------------+-------
1 none
11 none
99 none
106 default
output definitions
Vlan
Mhf-creation
Level
Release History
Release 6.6.1; command was introduced.
page 25-44
VLAN ID for which the default MD information is required.
Level
none
none
none
3
The VLAN ID of the default MD.
Indicates the MHF value for a VLAN that is part of the default MD
Options include none, explicit, or default.
The level of the maintenance domain.
OmniSwitch 6250 CLI Reference Guide
Ethernet OAM Commands
November 2009