Reset Packet-Drop Interface; Shutdown - H3C VSR Series Command Reference Manual

reset packet-drop interface

Use reset packet-drop interface to clear the dropped packet statistics for an interface or multiple
interfaces.
Syntax
reset packet-drop interface [ interface-type [ interface-number ] ]
Views
User view
Predefined user roles
network-admin
Parameters
interface-type: Specify an interface type. If you do not specify an interface type, this command clears
dropped packet statistics for all interfaces on the device.
interface-number: Specify an interface number. If you do not specify this argument, the command clears
dropped packet statistics for all interfaces of the specified type.
Examples
# Clear dropped packet statistics for the Layer 3 Ethernet interface GigabitEthernet 1/0/1.
<Sysname> reset packet-drop interface gigabitethernet 1/0/1
# Clear dropped packet statistics for all interfaces.
<Sysname> reset packet-drop interface
Related commands
display packet-drop

shutdown

Use shutdown to shut down an Ethernet interface or subinterface.
Use undo shutdown to bring up an Ethernet interface or subinterface.
Syntax
shutdown
undo shutdown
Default
A Layer 3 Ethernet interface or subinterface is up.
Views
Layer 3 Ethernet interface view, Layer 3 Ethernet subinterface view
Predefined user roles
network-admin
Usage guidelines
Some interface configurations might require an interface restart before taking effect.
26