Shutdown - H3C CR16000-F Command Reference Manual

Views
Layer 2 aggregate interface view
Layer 2 Ethernet interface view
Predefined user roles
network-admin
Parameters
instance-id : Specifies an Ethernet service instance ID in the range of 1 to 4096.
Examples
# On the Layer 2 Ethernet interface GigabitEthernet 3/1/1, create Ethernet service instance 1 and
enter Ethernet service instance view.
<Sysname> system-view
[Sysname] interface gigabitethernet 3/1/1
[Sysname-GigabitEthernet3/1/1] service-instance 1
[Sysname-GigabitEthernet3/1/1-srv1]
Related commands
display l2vpn service-instance

shutdown

Use shutdown to shut down a VSI.
Use undo shutdown to bring up a VSI.
Syntax
shutdown
undo shutdown
Default
A VSI is not manually shut down.
Views
VSI view
Predefined user roles
network-admin
Usage guidelines
Use this command to temporarily disable a VSI to provide Layer 2 switching services. The shutdown
action does not change settings on the VSI. You can continue to configure the VSI. After you bring up
the VSI again, the VSI provides services based on the latest settings.
Examples
# Shut down VSI vpn1.
<Sysname> system-view
[Sysname] vsi vpn1
[Sysname-vsi-vpn1] shutdown
Related commands
display l2vpn vsi
24