Display This - H3C MSR 20-20 Command Reference Manual

2416 C 162: B
HAPTER ASIC

display this

Syntax
View
Parameter
Description
Example
C C
ONFIGURATION OMMANDS
=System hotkeys=
Hotkeys Function
CTRL_A Move the cursor to the beginning of the current line.
CTRL_B Move the cursor one character left.
CTRL_C Stop current command function.
CTRL_D Erase current character.
CTRL_E Move the cursor to the end of the current line.
CTRL_F Move the cursor one character right.
CTRL_H Erase the character left of the cursor.
CTRL_K Kill outgoing connection.
CTRL_N Display the next command from the history buffer.
CTRL_P Display the previous command from the history buffer.
CTRL_R Redisplay the current line.
CTRL_V Paste text from the clipboard.
CTRL_W Delete the word left of the cursor.
CTRL_X Delete all characters up to the cursor.
CTRL_Y Delete all characters after the cursor.
CTRL_Z Return to the User View.
CTRL_] Kill incoming connection or redirect connection.
ESC_B Move the cursor one word back.
ESC_D Delete remainder of word.
ESC_F Move the cursor forward one word.
ESC_N Move the cursor down a line.
ESC_P Move the cursor up a line.
ESC_< Specify the beginning of clipboard.
ESC_> Specify the end of clipboard.
display this [ by-linenum ]
Any view
by-linenum: Specifies to display the number of each line.
Use the
display this
current view.
After finishing a set of configurations under a view, you can use the display this
command to check whether the configuration takes effect.
Note that:
A parameter is not displayed if it has the default configuration.
A parameter is not displayed if the configuration has not taken effect.
When you use the command under interface view, protocol view or protocol child
view, the command displays the configuration corresponding to the current view.
# Display configuration information of the current view (the display information
varies with configuration).
command to display the validated information under the