Info-Center Enable; Info-Center Logbuffer - H3C MSR 20-20 Command Reference Manual

2434 C 163: I
HAPTER NFORMATION

info-center enable

Syntax
View
Parameter
Description
Example

info-center logbuffer

Syntax
View
Parameter
Description
C C C
ENTER ONFIGURATION OMMANDS
info-center enable
undo info-center enable
System view
None
Use the
info-center enable
Use the
undo info-center enable
The system outputs information to the log host or the console only after the
information center is enabled first.
By default, the information center is enabled.
# Enable the information center.
<Sysname> system-view
[Sysname] info-center enable
% Information center is enabled
info-center logbuffer [ channel { channel-number | channel-name } | size buffersize ]
*
undo info-center logbuffer [ channel | size ]
System view
buffersize: Specifies the maximum number of log messages in a log buffer, in the
range 0 to 1,024 with 512 as the default value.
channel-number: A specified channel number, in the range 0 to 9.
channel-name: Specifies a channel name, which could be a default name or one
that is defined by the user. The user needs to specify a channel name first before
using it as a self-defined channel name. For more information, refer to
"info-center channel name" on page 2432.
Use the
info-center logbuffer
buffer and set the corresponding parameters.
Use the
undo info-center logbuffer
to a log buffer.
command to enable information center.
command to disable the information center.
command to enable information output to a log
command to disable information output