Authentication; Authentication-Did - H3C MSR 20-20 Command Reference Manual

2724 C 180: V
HAPTER OICE

authentication

Syntax
View
Parameter
Description
Related command:
Example

authentication-did

Syntax
RADIUS C C
ONFIGURATION OMMANDS
authentication
undo authentication
Access number view
None
Use the
authentication
for users who dial some access number.
Use the
undo authentication
function.
By default, the RADIUS authentication function is disabled for users who dial
access numbers.
For each access number, you can specify the RADIUS server to perform
authentication for users who dial it. If the authentication function is enabled for
users who dial some access number, only users who pass authentication can be
authorized to make IP calls. If the authentication function is disabled, users who
dial the access number can directly make IP calls no matter whether they are legal.
The authentication function must be enabled before the authorization function.
When the authentication function is disabled, the authorization function will
automatically be disabled, and meanwhile, the authorization and undo
authorization commands will be unavailable.
gw-access-number and authorization.
# Enable the authentication function for users who dial the access number 17909.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] dial-program
[Sysname-voice-dial] gw-access-number 17909
[Sysname-voice-dial-anum17909] authentication
# Disable the authentication function for users who dial the access number 17909.
[Sysname-voice-dial-anum17909] undo authentication
authentication-did
undo authentication-did
command to enable the RADIUS authentication function
command to disable the RADIUS authentication