Acct-Method - H3C MSR 20-20 Command Reference Manual

acct-method

Syntax
View
Parameter
Description
Related command:
Example
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] aaa-client
[Sysname-voice-aaa] accounting-did
# Disable the accounting function for all one-stage dialing users.
[Sysname-voice-aaa] undo accounting-did
acct-method { start-ack | start-no-ack | stop-only }
undo acct-method
Voice AAA client view
start-ack: The voice gateway sends an Accounting_Start request to the RADIUS
server and needs to receive an Accounting_Start acknowledgment before
connecting a call. The voice gateway sends an Accounting_Stop request to the
RADIUS server but does not need to receive an Accounting_Stop acknowledgment
before releasing the call.
start-no-ack: The voice gateway sends an Accounting_Start request or
Accounting_Stop request to the RADIUS server before connecting or releasing a
call, and directly connects or releases the call without waiting for an
acknowledgment from the RADIUS server.
stop-only: The voice gateway sends an Accounting_Stop request to the RADIUS
server before releasing a call, and directly releases the call without waiting for an
acknowledgment from the RADIUS server.
Use the
acct-method
RADIUS client.
Use the undo acct-method
By default, the accounting method is start-no-ack.
accounting and accounting-did.
# Set the accounting method to start-ack.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] aaa-client
[Sysname-voice-aaa] acct-method start-ack
# Restore the default accounting method.
[Sysname-voice-aaa] undo acct-method
command to configure an accounting method for the
command to restore the default.
2723