Mode - H3C MSR 20-20 Command Reference Manual

Msr 20/30/50 series routers
Hide thumbs Also See for MSR 20-20:
Table of Contents

Advertisement

2658
C
175: E1
HAPTER
AND
Related command:
Example

mode

Syntax
View
Parameter
Description
T1 C
C
ONFIGURATION
OMMANDS
After configuring a target match template with the match-template command
for a voice entity, you need to associate the entity with a logical interface to
indicate from which interface the traffic destined for the target should be routed.
timeslot-set, entity on page 2594, and pri-set.
# Associate a POTS entity with a TS group on an E1 interface.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] dial-program
[Sysname-voice-dial] entity 10 pots
[Sysname-voice-dial-entity10] line 1/0:1
mode zone-name [ default-standard ]
undo mode
R2 CAS view
zone-name: Country or region name. The argument can one of the following
values:
argentina: Uses Argentinean R2 signaling standard.
australia: Uses Australian R2 signaling standard.
bengal: Uses Bengalee R2 signaling standard.
brazil: Uses Brazilian R2 signaling standard.
china: Uses Chinese R2 signaling standard.
custom: Uses customized R2 signaling standard.
hongkong: Uses Hongkong R2 signaling standard.
india: Uses Indian R2 signaling standard.
indonesia: Uses Indonesian R2 signaling standard.
itu-t: Uses ITU-T R2 signaling standard.
korea: Uses Korean R2 signaling standard.
malaysia: Uses Malaysian R2 signaling standard.
mexico: Uses Mexican R2 signaling standard.
newzealand: Uses New Zealand R2 signaling standard.
singapore: Uses Singaporean R2 signaling standard.
thailand: Uses Thai R2 signaling standard.
default-standard: Initializes R2 signaling parameters such as values of the
force-metering command based on national R2 signaling variants.
Use the
command to configure a national R2 signaling variant.
mode

Advertisement

Table of Contents
loading

This manual is also suitable for:

Msr 20-21Msr 30-16Msr 30-20Msr 30-40Msr 30-60Msr 50 ... Show all

Table of Contents