Ipx Sap Max-Reserve-Servers - H3C MSR 20-20 Command Reference Manual

2546 C 172: IPX C
HAPTER
Parameter
Description
Related command:
Example

ipx sap max-reserve-servers

Syntax
View
Parameter
Description
Example
ipx sap mtu
Syntax
C
ONFIGURATION OMMANDS
None
Use the ipx sap gns-load-balance
to GNS requests in the Round-robin method.
Use the
undo ipx sap gns-load-balance
respond with the nearest server.
By default, the Round-Robin mode is used, that is, the router informs the clients of
servers in turn lest a server shoulders too much pressure.
ipx sap gns-disable-reply.
# Configure the router to respond to clients with the nearest server.
<Sysname> system-view
[Sysname] undo ipx sap gns-load-balance
ipx sap max-reserve-servers length
undo ipx sap max-reserve-servers
System view
length: Maximum reserve queue length of the same type service information,
ranging from 1 to 2,048.
Use the
ipx sap max-reserve-servers
reserve queue length of the same type service information.
Use the
undo ipx sap max-reserve-servers
By default, the value is 2,048.
If a newly configured value is smaller than the previous one, the excessive items in
the service information table (SIT for short) will not be deleted. If the service
information item number for the same service type exceeds the maximum value,
new service information will not be added.
# Set the maximum reserve queue length of the same type service information to
1,024.
<Sysname> system-view
[Sysname] ipx sap max-reserve-servers 1024
ipx sap mtu bytes
command to configure the router to respond
command to configure the router to
command to specify the maximum
command to restore the default.