Fax Baudrate - H3C MSR 20-20 Command Reference Manual

fax baudrate

Syntax
View
Parameter
Description
Table 696 Description on fields of the display voice fax statistics command
Field
SPOOL_TIME_OVER
GET_INVALID_T30MESSAGE
IPP_CALL_RELEASE
NORMAL_RELEASE
UNKNOWN_REASON
fax baudrate { 2400 | 4800 | 9600 | 14400 | disable | voice }
undo fax baudrate
POTS/VoIP/VoFR entity view
2400: Sets the maximum fax baud rate to 2,400 bps.
4800: Negotiates the fax baud rate first in accordance with the V.27 fax protocol.
The maximum fax baud rate is 4,800 bps.
9600: Negotiates the fax baud rate first in accordance with the V.29 fax protocol.
The maximum fax baud rate is 9,600 bps.
14400: Negotiates the fax baud rate first in accordance with the V.17 fax protocol.
The maximum fax baud rate is 9,600 bps.
disable: Disables the fax function.
voice: Finalizes the allowed maximum fax baud rate first in accordance with voice
encoding/decoding protocols.
If G.711 is adopted, the fax baud rate is 14,400 bps and the fax protocol is
■
V.17.
If G.723.1 Annex A is adopted, the fax baud rate is 4,800 bps and the fax
■
protocol is V.27.
If G.726 is adopted, the fax baud rate is 14,400 bps and the fax protocol is
■
V.17.
If G.729 is adopted, the fax baud rate is 9,600 bps and the fax protocol is V.29.
■
Use the
fax baudrate
command to configure the maximum fax baud rate.
Description
Statistics of the number of
connections released in the case that
the number of spooling attempts
exceeds the maximum
Statistics of the number of
connections released owing to invalid
T.30 message
Statistics of the number of released IPP
calls
Statistics of the number of
connections released normally
Statistics of the number of
connections released for unknown
reasons
2683