Ipx Update-Change-Only; Ping Ipx - H3C MSR 20-20 Command Reference Manual

2550 C 172: IPX C
HAPTER
View
Parameter
Description
Example

ipx update-change-only

Syntax
View
Parameter
Description
Example

ping ipx

Syntax
View
C
ONFIGURATION OMMANDS
Interface view
ticks: Delay in ticks, ranging from 0 to 30,000. One tick is 1/18 second
(approximately 55 ms).
Use the
ipx tick
interface.
Use the
undo ipx tick
By default, the delay on an Ethernet or a VLAN interface is 1 tick, that on an
asynchronous serial port is 30 ticks, and that on a synchronous serial port is 6 ticks.
# Configure the delay for sending IPX packets as 5 ticks on the interface Ethernet
1/0.
<Sysname> system-view
[Sysname] interface ethernet 1/0
[Sysname-Ethernet1/0] ipx tick 5
ipx update-change-only
undo ipx update-change-only
Interface view
None
Use the
ipx update-change-only
feature on the current interface.
Use the undo ipx update-change-only
update feature on the current interface.
By default, the triggered update feature is disabled on an interface.
# Enable the triggered update feature on the interface Ethernet 1/0.
<Sysname> system-view
[Sysname] interface ethernet 1/0
[Sysname-Ethernet1/0] ipx update-change-only
ping ipx network.node [ -c count | -t timeout | -s size ] *
Any view
command to specify a delay for sending IPX packets on the
command to restore the default.
command to enable the triggered update
command to disable the triggered