H3C MSR 20-20 Command Reference Manual page 2698

2698 C 177: H.323 C
HAPTER
View
Parameter
Description
Example
C
ONFIGURATION OMMANDS
Voice view
descriptor: H.323 descriptor, comprising 1 to 64 characters.
Use the voip h323-descriptor
the voice gateway.
Use the
undo voip h323-descriptor
descriptor.
By default, the descriptor is Wqldg0Hcwfydz.
You are recommended to use the default descriptor.
If at both ends are the devices of H3C, you are recommended to configure the
same descriptor for them.
# Configure an H.323 descriptor mystring for the voice gateway.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] voip h323-descriptor mystring
command to configure an H.323 descriptor for
command to restore the default H.323