Terminal Logging - H3C MSR 20-20 Command Reference Manual

2446 C 163: I
HAPTER NFORMATION
View
Parameter
Description
Example

terminal logging

Syntax
View
Parameter
Description
Example
C C C
ENTER ONFIGURATION OMMANDS
undo terminal debugging
User view
None
Use the terminal debugging
information on the current terminal.
Use the
undo terminal debugging
information on the current terminal.
By default, the display of debug information on the current terminal is disabled.
Note that the debug information is displayed (using the terminal debugging
command) only after the monitoring of system information is enabled on the
current terminal first (using the terminal monitor command).
# Enable the display of debug information on the current terminal.
<Sysname> terminal debugging
% Current terminal debugging is on
terminal logging
undo terminal logging
User view
None
Use the
terminal logging
the current terminal.
Use the
undo terminal logging
information on the current terminal.
By default, the display of log information on the current terminal is disabled.
Note that the log information is displayed (using the terminal logging command)
only after the monitoring of system information is enabled on the current terminal
first (using the terminal monitor command).
# Disable the display of log information on the current terminal.
<Sysname> undo terminal logging
% Current terminal logging is off
command to enable the display of debug
command to disable the display of debug
command to enable the display of log information on
command to disable the display of log