2548
C
172: IPX C
HAPTER
ipx sap timer update
Syntax
View
Parameter
Description
Related command:
Example
ipx service
Syntax
View
Parameter
C
ONFIGURATION
OMMANDS
ipx sap timer update seconds
undo ipx sap timer update
System view
seconds: SAP updating interval, ranging from 10 to 60,000 seconds.
Use the
ipx sap timer update
interval.
Use the
undo ipx sap timer update
By default, the update interval is 60 seconds.
Using this command does not take effect on an interface that adopts triggered
update.
ipx sap multiplier, ipx update-change-only.
# Specify the SAP updating interval as 300 seconds.
<Sysname> system-view
[Sysname] ipx sap timer update 300
ipx service service-type server-name network.node socket hop hopcount [ preference
preference ]
undo ipx service { service-type [server-name [ network.node ] ] [ preference
preference ] | all }
System view
service-type: Service type, ranging from 0 to 0xFFFF. A value of 0 indicates all
service types.
server-name: Name of the server which provides the service, a string of 1 to 47
characters.
network.node: Network ID and node ID of a server. Network ID is an 8-bit
hexadecimal number, ranging from 0x1 to 0xFFFFFFFD. Node ID has a length of 48
bits, represented by a triplet of 4-digit hexadecimal numbers separated by "-".
Leading 0s can be omitted.
socket: It is a 4-bit hexadecimal number, ranging from 0x1 to 0xFFFF.
command to specify the IPX SAP updating
command to restore the default.