Poe Pse-Policy Priority; Poe Update - H3C MSR 20-20 Command Reference Manual

2504 C 166: P E C
HAPTER O

poe pse-policy priority

Syntax
View
Parameter
Description
Example

poe update

Syntax
View
Parameter
Description
Example
C
ONFIGURATION OMMANDS
poe pse-policy priority
undo poe pse-policy priority
System view
None
Use the
poe pse-policy priority
management priority policy.
Use the
undo poe pse-policy priority
management priority policy.
By default, no PSE power management priority policy is configured.
# Configure a PSE power management priority policy.
<Sysname> system-view
[Sysname] poe pse-policy priority
poe update { full | refresh } filename [ pse pse-id ]
System view
full: Specifies to upgrade the PSE processing software in full mode when the
software is unavailable.
refresh: Specifies to upgrade the PSE processing software in refresh mode when
the software is available.
filename: Name of the upgrade file, a string of 1 to 64 characters. This file must be
under the root directory of the file system of the device. The extension of the
upgrade file varies with devices.
pse pse-id: Specifies a PSE ID. The support for this argument varies with devices.
pse-id indicates number of the slot where a PoE interface locates.
Use the
poe update
# Upgrade the processing software of PSE 2 online
<Sysname> system-view
[Sysname] poe update refresh 0400_001.S19 pse 2
command to configure a PSE power
command to remove the PSE power
command to upgrade the PSE processing software online.