Timer First-Dial; Timer Hookoff-Interval - H3C MSR 20-20 Command Reference Manual

2612 C 173: V IP C
HAPTER O

timer first-dial

Syntax
View
Parameter
Description
Example

timer hookoff-interval

Syntax
View
Parameter
Description
C
ONFIGURATION OMMANDS
timer first-dial seconds
undo timer first-dial
FXS/FXO voice subscriber line view
seconds: Maximum interval in seconds between off-hook and dialing the first
digit, in the range of 1 to 300.
Use the
timer first-dial
off-hook and dialing the first digit.
Use the
undo timer first-dial
By default, the maximum interval between off-hook and dialing the first digit is 15
seconds.
Upon the expiration of the timer, the subscriber will be prompted to hook up and
the call is terminated.
# Set the maximum interval between off-hook and dialing the first digit to 10
seconds.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] subscriber-line 1/0
[Sysname-voice-line1/0] timer first-dial 15
timer hookoff-interval milliseconds
undo timer hookoff-interval
FXO voice subscriber line view
milliseconds: Interval between on-hook and off-hook in milliseconds, in the range
of 500 to 4,000.
Use the
timer hookoff-interval
on-hook and off-hook.
Use the undo timer hookoff-interval
By default, the interval between on-hook and off-hook is 500 milliseconds.
In the delay off-hook mode, the on-hook/off-hook state between FXS and FXO
voice subscriber lines is consistent. When an FXS voice subscriber line goes
command to configure the maximum interval between
command to restore the default setting.
command to configure the interval between
command to restore the default.