Gk-Id; Gk-Security Call Enable - H3C MSR 20-20 Command Reference Manual

2694 C 177: H.323 C
HAPTER

gk-id

Syntax
View
Parameter
Description
Related command:
Example

gk-security call enable

Syntax
View
Parameter
Description
C
ONFIGURATION OMMANDS
[Sysname-voice-gk] gk-id gk-center gk-addr 1.1.1.1
[Sysname-voice-gk] gk-2nd-id gk-backup gk-addr 1.1.1.2
gk-id gk-name gk-addr gk-ipaddress [ ras-port ]
undo gk-id
Gatekeeper client view
gk-name: Gatekeeper name, a string of 1 to 128 case sensitive characters.
gk-ipaddress: IP address of gatekeeper.
ras-port: RAS port used by the gatekeeper, an integer in the range 1 to 65535. The
default is 1719.
Use the gk-id command to configure the primary gatekeeper for the gateway.
Use the
undo gk-id
By default, no primary gatekeeper is specified for the gateway.
Only after you configure the information of the primary gatekeeper can the
gateway locate the gatekeeper for registration.
area-id, gw-id, gk-2nd-id, gw-address, ras-on.
# Configure the primary server, setting its IP address to 1.1.1.1, name to gk-center,
and RAS port to the default.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] gk-client
[Sysname-voice-gk] gk-id gk-center gk-addr 1.1.1.1
gk-security call enable
undo gk-security call enable
Gatekeeper client view
None
Use the gk-security call enable
voice gateway.
command to remove the primary gatekeeper.
command to enable security calling on the