180
aaa-client
Syntax
View
Parameter
Description
Example
accounting
Syntax
View
Parameter
Description
V
RADIUS C
OICE
C
OMMANDS
aaa-client
Voice view
None
Use the
command to enter voice AAA client view.
aaa-client
# Enter voice AAA client view.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] aaa-client
[Sysname-voice-aaa]
accounting
undo accounting
Access number view
None
Use the
accounting
command to enable the RADIUS accounting function for
users who dial some access number.
Use the
undo accounting
By default, the RADIUS accounting function is disabled for users who dial access
numbers.
On one voice gateway, the RADIUS accounting function for one-stage dialing
users (who dial a called number to originate a call after picking up the phone)
differs from that for two-stage dialing users (who first dial an access number and
then a called number to originate a call after picking up the phone). This
command is only applicable to an access number, namely, two-stage dialing users.
ONFIGURATION
command to disable the RADIUS accounting function.