Tracert Ipv6 - H3C MSR 20-20 Command Reference Manual

tracert ipv6

Syntax
View
Parameter
Description
Example
press CTRL_C to break
1 128.3.112.1 10 ms 10 ms 10 ms
2 128.32.210.1 19 ms 19 ms 19 ms
3 128.32.216.1 39 ms 19 ms 19 ms
4 128.32.136.23 19 ms 39 ms 39 ms
5 128.32.168.22 20 ms 39 ms 39 ms
6 128.32.197.4 59 ms 119 ms 39 ms
7 131.119.2.5 59 ms 59 ms 39 ms
8 129.140.70.13 80 ms 79 ms 99 ms
9 129.140.71.6 139 ms 139 ms 159 ms
10 129.140.81.7 199 ms 180 ms 300 ms
11 129.140.72.17
12 * * *
13 128.121.54.72
14 * * *
15 * * *
16 * * *
17 * * *
18 18.26.0.115 339 ms 279 ms 279 ms
tracert ipv6 [ -f first-ttl | -m max-ttl | -p port | -q packet-number | -w timeout ] *
remote-system
Any view
-f first-ttl: Specifies the first TTL, that is, the allowed number of hops for the first
packet, in the range 1 to 255. It defaults to 1 and must be less than the maximum
TTL.
-m max-ttl: Specifies the maximum TTL, that is, the maximum allowed number of
hops for a packet, in the range 1 to 255. It defaults to 30 and must be greater
than the first TTL.
-p port: Specifies the UDP port number of the destination device, in the range 1 to
65535. The default value is 33434. It is unnecessary to modify this parameter.
-q packet-number: Specifies the number of probe packets sent each time, in the
range 1 to 65535, defaulting to 3.
-w timeout: Specifies the timeout time of the probe packets, in the range 1 to
65535, in milliseconds. The default value is 5000 ms.
remote-system: IPv6 address or host name (a string of 1 to 46 characters) of the
destination device.
Use the command to view the routers the IPv6 packets traverse from
tracert ipv6
the source to the destination device.
# View the routes involved for packets to travel from the source to the destination
with IPv6 address 3002::1
300 ms 239 ms 239 ms
259 ms 499 ms 279 ms
2401