Vlan Configuration Commands; Basic Vlan Configuration Commands; Bandwidth; Default - H3C MSR Series Command Reference Manual

VLAN configuration commands

Basic VLAN configuration commands

bandwidth

Use bandwidth to set the expected bandwidth for a VLAN-interface.
Use undo bandwidth to cancel the configuration.
Syntax
bandwidth bandwidth-value
undo bandwidth
Views
VLAN-interface view
Default command level
2: System level
Parameters
bandwidth-value: Sets the expected bandwidth in the range of 1 to 4,294,967,295 kbps.
Usage guidelines
You can obtain the expected bandwidth of an interface by querying the ifspeed value of the MIB node
with third-party software.
The expected bandwidth is used by network management systems for monitoring bandwidth, but
does not affect the actual bandwidth of the interface.
Examples
# Set the expected bandwidth to 10,000 kbps for interface VLAN-interface 1.
<Sysname> system-view
[Sysname] interface vlan-interface 1
[Sysname-Vlan-interface1] bandwidth 10000

default

Use default to restore the default settings for a VLAN-interface.
Syntax
default
Views
VLAN-interface view
Default command level
2: System level
12