Clock Timezone - H3C MSR 20-20 Command Reference Manual

2408 C 162: B
HAPTER ASIC
Related command:
Example

clock timezone

Syntax
View
Parameter
Description
C C
ONFIGURATION OMMANDS
specifies to adopt daylight saving time from 00:00:00 of June 6 until 00:00:00 of
October 1 each year from 2007 (2007 inclusive). The daylight saving time adds
one hour to the current device time.
After the configuration takes effect, use the display clock command to view the
result. The information such as log file and debug adopts the local time modified
by time-zone and daylight saving time.
Note that:
The time range from "start-time" in "start-date" to "end-time" in "end-date"
■
must be longer than one day and shorter than one year. Otherwise, the
argument is considered as invalid and the configuration fails.
If the current system time is in the time range specified with this command, the
system time automatically adds "add-time" after the execution of this command.
clock datetime, clock summer-time one-off, clock timezone, display clock.
# For the summer time in abc2 between 06:00:00 on 08/01/2007 and 06:00:00
on 09/01/2007 and from 06:00:00 08/01 to 06:00:00 on 09/01 each year after
2007, set the system clock ahead one hour.
<Sysname> clock summer-time abc2 repeating 06:00:00 08/01/2007 06:00
:00 09/01/2007 01:00:00
clock timezone zone-name { add | minus } zone-offset
undo clock timezone
User view
zone-name: Time zone name, a string of 1 to 32 characters. It is case sensitive.
add: Positive offset to universal time coordinated (UTC) time.
minus: Negative offset to UTC time.
zone-offset: In the format of HH/MM/SS (hours/minutes/seconds), where HH is
hours in the range 0 to 23, MM is minutes in the range 0 to 59, and SS is seconds
in the range 0 to 59. The zeros in the argument can be omitted except for
indicating 0 hours.
Use the
clock timezone
Use the
undo clock timezone
default UTC time zone.
By default, the local time zone is UTC zone.
command to set the local time zone.
command to restore the local time zone to the