Info-Center Trapbuffer; Logfile Save - H3C MSR 20-20 Command Reference Manual

2444 C 163: I
HAPTER NFORMATION
Example

info-center trapbuffer

Syntax
View
Parameter
Description
Example

logfile save

Syntax
C C C
ENTER ONFIGURATION OMMANDS
Use the undo info-center timestamp loghost
default.
By default, the time stamp format for log information sent to the log host is date.
# Set not to include the year information in the output information to the log
host.
<Sysname> system-view
[Sysname] info-center timestamp loghost no-year-date
info-center trapbuffer [channel { channel-number | channel-name } | size buffersize ]
*
undo info-center trapbuffer [ channel | size ]
System view
size buffersize: Specifies the maximum number of trap messages in a trap buffer
in the range 0 to 1,024 with 256 as the default value.
channel-number: Specifies a channel number, in the range 0 to 9.
channel-name: Specifies a channel name, which could be a default name or one
that is defined by the user. The user needs to specify a channel name first before
using it as a self-defined channel name. For more information, refer to
"info-center channel name" on page 2432.
Use the
info-center trapbuffer
trap buffer and set the corresponding parameters.
Use the
undo info-center trapbuffer
to the trap buffer.
By default, information output to the trap buffer is enabled with channel 3
(trapbuffer) as the default channel and a maximum buffer size of 256.
Note that the info-center trapbuffer command takes effect only after the
information center is enabled with the info-center enable command.
# Enable system to output information to the trap buffer with a default buffer size
of 30.
<Sysname> system-view
[Sysname] info-center trapbuffer size 30
logfile save
command to restore the
command to enable information output to the
command to disable information output