Description
Example
modem timer answer
Syntax
View
Parameter
Description
Example
parity
Syntax
View
Parameter
Use the
modem auto-answer
auto-answer.
Use the
undo modem auto-answer
manual answer.
n
This command takes effect on the AUX port and other asynchronous interfaces
only, and cannot be applied to the Console port.
# Set the answering mode to auto-answer.
<Sysname> system-view
[Sysname] user-interface aux 0
[Sysname-ui-aux0] modem auto-answer
modem timer answer time
undo modem timer answer
User interface view
time: Timeout time in the range 1 to 60 seconds.
Use the
modem timer answer
waiting for the carrier signal after the off-hook action when setting up an
incoming call connection.
Use the
undo modem timer answer
seconds.
n
This command takes effect on the AUX port and other asynchronous interfaces
only, and cannot be applied to the Console port.
# Set the timeout interval to 50 seconds.
<Sysname> system-view
[Sysname] user-interface aux 0
[Sysname-ui-aux0] modem timer answer 50
parity { even | mark | none | odd | space }
undo parity
User interface view
even: Even parity check.
command to set the answering mode to
command to restore the default, or
command to set the timeout interval spent
command to restore the default, or 30
2463