Example
description (voice subscriber line view)
Syntax
View
Parameter
Description
Example
dial-program
Syntax
View
Parameter
Use the
undo description
By default, no description is configured for the voice entity.
You can use the description command to add a description to a voice entity,
which has no effect on the performance of the voice entity interface. You can view
this description with the display command.
# Add the description local-entity 10 to voice entity 10.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] dial-program
[Sysname-voice-dial] entity 10 pots
[Sysname-voice-dial-entity10] description local-entity10
description text
undo description
FXS/FXO/E&M voice subscriber line view
text: Description string of voice subscriber line, consisting of up to 80 characters.
Use the
description
command to configure a subscriber line description string.
Use the
undo description
By default, no description is configured for the voice subscriber line.
You can use the description command to add a description to a voice subscriber
line, which has no effect on the performance of the voice entity. You can view this
description with the display command.
# Mark voice subscriber line 1/0 as lab_1.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] subscriber-line 1/0
[Sysname-voice-line1/0] description lab_1
dial-program
Voice view
None
command to delete the voice entity description string.
command to delete the description.
2575