Poe Max-Power; Poe Max-Power (System View) - H3C MSR 20-20 Command Reference Manual

Example

poe max-power

Syntax
View
Parameter
Description
Example

poe max-power (system view)

Syntax
View
By default, the PSE is disabled from detecting nonstandard PDs.
# Enable PSE 2 to detect nonstandard PDs.
<Sysname> system-view
[Sysname] poe legacy enable pse 2
poe max-power max-power
undo poe max-power
PoE interface view/PoE-profile file view
max-power: Maximum power in milliwatts allocated to a PoE interface. The range
of this argument varies with devices.
Use the
poe max-power
interface.
Use the
undo poe max-power
power of a PoE interface.
By default, the maximum power of the PoE interface is 15,400 milliwatts.
# Set the maximum power of Ethernet 1/0 to 12,000 milliwatts.
<Sysname> system-view
[Sysname] interface ethernet 1/0
[Sysname-Ethernet1/0] poe max-power 12000
# Set the maximum power of Ethernet 1/0 to 12,000 milliwatts through a PoE
configuration file.
<Sysname> system-view
[Sysname] poe-profile abc
[Sysname-poe-profile-abc-1] poe max-power 12000
[Sysname-poe-profile-abc-1] quit
[Sysname] interface ethernet 1/0
[Sysname-Ethernet1/0]apply poe-profile name abc
poe max-power max-power [ pse pse-id ]
undo poe max-power [ pse pse-id ]
System view
command to configure the maximum power for a PoE
command to restore the default maximum
2499