H3C MSR 20-20 Command Reference Manual page 2636

2636 C 174: D P
HAPTER IAL
C C
LAN ONFIGURATION OMMANDS
For the left-right dot match rule, digits which the dots in the output-number
■
argument correspond to are extracted from left to right according to the
number of dots in the output-number argument to replace the dots in the
output-number argument one by one. The digits that are not extracted in the
input-number argument are discarded. Note that the right-left and left-right
dot match rules are only applicable to the dot handling in the input number
argument and that the extracted digits will always replace the dots in the
output-number argument from left to right.
number-type: Specifies the type of a number.
input-number-type: Type of an input number involved in number substitution. For
the values, see Table 688.
Table 688 Input number type
Number type
abbreviated
any
international
national
network
reserved
subscriber
unknown
output-number-type: Type of an output number involved in number substitution.
For the values, see Table 689.
Table 689 Output number type
Number type
abbreviated
international
national
network
reserved
subscriber
unknown
numbering-plan: Specifies a numbering plan.
input-numbering-plan: Input numbering plan involved number substitution. For
the values, see Table 690.
Table 690 Input numbering plan
Numbering plan
any
data
Description
Abbreviated number
Any number
International number
National number, but not a local
network
Specific service network number
Reserved number
Local network number
Number of an unknown type
Description
Abbreviated number
International number
National number, but not a local network number
Specific service network number
Reserved number
Local network number
Number of an unknown type
Description
Any numbering plan
Data numbering plan