Ipx Network; Ipx Rip Import-Route Static - H3C MSR 20-20 Command Reference Manual

2540 C 172: IPX C
HAPTER
Example

ipx network

Syntax
View
Parameter
Description
Example

ipx rip import-route static

Syntax
View
Parameter
Description
C
ONFIGURATION OMMANDS
# Enable Ethernet 1/0 to forward type 20 broadcast packets.
<Sysname> system-view
[Sysname] interface ethernet 1/0
[Sysname-Ethernet1/0] ipx netbios-propagation
ipx network network-number
undo ipx network
Interface view
network-number: IPX network ID in hexadecimal format. It ranges from 0x1 to
0xFFFFFFFD. Leading 0s can be omitted.
Use the
ipx network
Use the
undo ipx network
interface.
By default, no network ID is allocated to an interface, that is, IPX is still disabled on
the interface after IPX is enabled in system view.
# Assign network ID 675 to the interface Ethernet 1/0.
<Sysname> system-view
[Sysname] interface ethernet 1/0
[Sysname-Ethernet1/0] ipx network 675
ipx rip import-route static
undo ipx rip import-route static
System view
None
Use the
ipx rip import-route static
redistribution into RIP. If successful, RIP routing updates will contain the
redistributed static routes.
Use the
undo ipx rip import-route static
redistribution.
By default, IPX RIP does not redistribute static routes.
command to configure a network ID for the interface.
command to delete the IPX network ID of the
command to enable static route
command to disable static route