Display Clock; Display Configure-User - H3C MSR 20-20 Command Reference Manual

Description
Example

display clock

Syntax
View
Parameter
Description
Related command:
Example

display configure-user

Syntax
View
Parameter
Description
Use the
display clipboard
To copy the specified content to the clipboard:
Move the cursor to the starting position of the content and press the
■
<Esc+Shift+,> combination ("," is an English comma).
Move the cursor to the ending position of the content and press the
■
<Esc+Shift+.> combination ("," is an English dot) to copy the specified content
to the clipboard.
# View the content of the clipboard.
<Sysname> display clipboard
---------------- CLIPBOARD-----------------
ip route 10.1.0.0 255.0.0.0 eth 0
display clock
Any view
None
Use the display clock
The current system time and date are decided by the clock datetime, clock
summer-time one-off (or clock summer-time repeating), clock timezone.
Refer to the Configuring the system clock section in the operation manual for the
detailed rules.
clock datetime, clock summer-time one-off, clock summer-time repeating,
clock timezone.
# Display the current time and date.
<Sysname> display clock
09:41:23 UTC Thu 12/15/2005
display configure-user
Any view
None
Use the
display configure-user
view at the same time.
command to view the contents of the clipboard.
command to view the current system time and date.
command to display the users entering system
2411