Configuring The Maximum Bandwidth - H3C MSR Series Configuration Manual
Comware 5 wlan
Hide thumbs
Also See for MSR Series:
- Command reference manual (1187 pages) ,
- Manual (33 pages) ,
- Configuration manual (29 pages)
Table of Contents
Advertisement
MCS index
15
802.11 rates include three types: mandatory rates, supported rates, and multicast rates.
•
Mandatory rates—The AP must support mandatory rates. Clients can only associate with the
AP when they support the mandatory rates.
•
Supported rates—These are higher rates supported by the AP besides the mandatory rates.
Supported rates allow some clients that support both mandatory and supported rates to choose
higher rates when communicating with the AP.
•
Multicast rates—These are rates that are supported by the AP besides the mandatory rates.
Multicast rates allow clients to send multicast traffic at the multicast rates.
When you specify the maximum MCS index, you actually specify a range. For example, if you specify
the maximum MCS index as 5 for mandatory rates, rates corresponding to MCS indexes 0 through 5
are configured as 802.11n mandatory rates.
To configure 802.11n rates:
Step
1.
Enter system view.
2.
Enter RRM view.
3.
Specify the maximum MCS
index for 802.11n mandatory
rates.
4.
Specify the maximum MCS
index for 802.11n supported
rates.
5.
Specify the MCS index for
802.11n multicast rates.
Configuring the maximum bandwidth
The following matrix shows the feature and router compatibility:
Feature
802.11n
Number of
spatial streams
2
MSR80
MSR
0
900
Available
for
No
MSR800
-W and
Modulation
64-QAM
Command
system-view
wlan rrm
dot11n mandatory
maximum-mcs index
dot11n support maximum-mcs
index
dot11n multicast-rate index
MSR90
MSR
0-E
930
Available
Available
for
for MSR
MSR900
930-W,
-E-W
MSR
28
Data rate (Mbps)
800ns GI
270.0
Remarks
N/A
N/A
Optional.
By default, no maximum MCS
index is specified for 802.11n
mandatory rates.
If you configure the client
dot11n-only command, you must
specify the maximum MCS index.
Optional.
By default, the maximum MCS
index for 802.11n supported rates
is 76.
Optional.
By default, the MCS index for
802.11n multicast rates is not
specified.
Configure the same MCS index
settings for APs using 802.11n
radios in a mesh network.
MSR
MSR 20
20-1X
Available
Available
for
for
routers
routers
with a
with a
400ns GI
300.0
MSR 30
MSR 50
Available
Available
for
for
routers
routers
with a
with a
- Quick Links:
- Configuring Wlan Interfaces
Hide quick links:
Advertisement
Table of Contents
