Configure-User Count; Display Clipboard - H3C MSR 20-20 Command Reference Manual

2410 C 162: B
HAPTER ASIC
Example

configure-user count

Syntax
View
Parameter
Description
Related command:
Example

display clipboard

Syntax
View
Parameter
C C
ONFIGURATION OMMANDS
Table 622 Default level of the commands
Command level
Manage (3)
# Set the command level of the interface command to 0.
<Sysname> system-view
[Sysname] command-privilege level 0 view system interface
configure-user count number
undo configure-user count
System view
number: Number of users, the value range varies with devices.
Use the
configure-user count
allowed to enter system view at the same time.
Use the undo configure-user count
configuration.
Two users are allowed to configure in system view by default.
display configure-user.
n
The support for the command varies with devices.
■
When multiple users enter system view to configure certain attribute, only the
■
last configuration applies.
When the number of users has already reached the limit, other users can not
■
enter system view.
# Configure the limit of users as 4.
<Sysname> system-view
[Sysname] configure-user count 4
display clipboard
Any view
None
Commands
FTP, XMODEM, TFTP, file system operation commands
command to configure the number of users
command to restore the default