Chkconfig Acseid On; Service Acseid Condrestart - H3C MSR 20-20 Command Reference Manual

Examples

chkconfig acseid on

Syntax
View
Parameters
Description
Examples

service acseid condrestart

Syntax
View
Parameters
Description
Examples
# Configure not to start up ACSEI client automatically when the system is started
up.
<Sysname> oap connect slot 6
Connected to OAP!
[root@localhost ~]# chkconfig acseid off
chkconfig acseid on
Any directory of the Linux system
None
Use the chkconfig acseid on
automatically, that is, configure to start up ACSEI client simultaneously with the
system.
By default, ACSEI client installed on the OAP module is started up automatically
when the system is started up.
# Configure to start up ACSEI client automatically when the system is started up.
<Sysname> oap connect slot 6
Connected to OAP!
[root@localhost ~]# chkconfig acseid on
service acseid condrestart
Any directory of the Linux system
None
Use the
service acseid condrestart
conditionally. That is, if ACSEI client is running, this command stops the process
before it restarts the process; if ACSEI client is not running, this command does
not restart the process.
# Execute conditional restart of ACSEI client (when ACSEI client is running).
<Sysname> oap connect slot 6
Connected to OAP!
[root@localhost ~]# service acseid status
acseic-daemon (pid 2849) is running...
[root@localhost ~]# service acseid condrestart
Stopping acseic-daemon: [
Starting acseic-daemon: [
command to configure to start up ACSEI client
command to restart ACSEI client
OK ]
OK ]
2525