Information; Display Channel - H3C MSR 20-20 Command Reference Manual

163

display channel

Syntax
View
Parameter
Description
Example
I
NFORMATION
C
ONFIGURATION
display channel [ channel-number | channel-name ]
Any view
channel-number: Displays information of the channel with a specified number,
where channel-number represents the channel number, in the range 0 to 9.
channel-name: Displays information of the channel with a specified name, where
channel-name represents the channel name, which could be a default name or
one that is defined by the user. The user needs to specify a channel name first
before using it as a self-defined channel name. For more information, refer to
"info-center channel name" on page 2432.
Table 624 Information channels for different output directions
Output direction
Console
Monitor terminal
Log host
Trap buffer
Log buffer
SNMP NMS
Log file
Use the display channel
If no channel is specified, information for all channels is displayed.
# Display information for channel 0.
<Sysname> display channel 0
channel number:0, channel name:console
MODU_ID NAME ENABLE LOG_LEVEL
ffff0000 default Y
Table 625 Description on the fields of the display channel command
Field Description
channel number A specified channel number, in the range 0 to 9.
C
ENTER
C
OMMANDS
Information channel
number
0
1
2
3
4
5
9
command to display channel information.
ENABLE TRAP_LEVEL
warnings Y debugging
Default channel name
console
monitor
loghost
trapbuffer
logbuffer
snmpagent
channel9
ENABLE DEBUG_LEVEL
Y debugging