Info-Center Console Channel - H3C MSR 20-20 Command Reference Manual

Parameter
Description
Example

info-center console channel

Syntax
View
Parameter
Description
Example
channel-number: Specifies a channel number, in the range 0 to 9.
channel-name: Specifies a channel name, a string of 1 to 30 characters. It should
not start with a number, an underscore (-), a forward slash (/), or a backward slash
(). The channel name is not case sensitive.
Use the
info-center channel name
specified channel number.
Use the
undo info-center channel
channel with a specified channel number.
Refer to Table 624 for details of default channel names and channel numbers.
# Name channel 0 as abc.
<Sysname> system-view
[Sysname] info-center channel 0 name abc
info-center console channel { channel-number | channel-name }
undo info-center console channel
System view
channel-number: Specifies a channel number, in the range 0 to 9.
channel-name: Specifies a channel name, which could be a default name or one
that is defined by the user. The user needs to specify a channel name first before
using it as a self-defined channel name. For more information, refer to
"info-center channel name" on page 2432.
Use the
info-center console channel
output system information to the console.
Use the undo info-center console channel
output channel to the console.
By default, output of information to the console is enabled with channel 0 as the
default channel (known as console).
Note that the info-center console channel command takes effect only after the
information center is enabled first with the info-center enable command.
# Set channel 0 to output system information to the console.
<Sysname> system-view
[Sysname] info-center console channel 0
command to name a channel with a
command to restore the default name for a
command to specify the channel to
command to restore the default
2433