Ipx Rip Timer Update; Ipx Route-Static - H3C MSR 20-20 Command Reference Manual

2542 C 172: IPX C
HAPTER
Related command:
Example

ipx rip timer update

Syntax
View
Parameter
Description
Related command:
Example

ipx route-static

Syntax
View
C
ONFIGURATION OMMANDS
Use the undo ipx rip multiplier
The default is 3 times the update interval.
A timer is set for each routing entry to keep track of elapsed time since the route
was received. Every time the updating packet containing the route is received, the
timer is reset to zero. If a RIP route is not updated within the aging period, the
system will regard the route as invalid and will delete it from the routing table.
ipx rip timer update.
# Configure the aging interval to be 5 times the update interval.
<Sysname> system-view
[Sysname] ipx rip multiplier 5
ipx rip timer update seconds
undo ipx rip timer update
System view
seconds: RIP updating interval in seconds, ranging from 10 to 60,000.
Use the
ipx rip timer update
Use the
undo ipx rip timer update
The default update interval is 60 seconds.
ipx rip multiplier.
# Specify a RIP update interval of 30 seconds.
<Sysname> system-view
[Sysname] ipx rip timer update 30
ipx route-static dest-network { network.node | interface-type interface-number }
[ preference value ] [ tick ticks hop hops ]
undo ipx route-static { dest-network [ nexthop-addr | interface-type
interface-number ] | all }
System view
command to restore the default.
command to specify a RIP update interval.
command to restore the default.