Default Entity Vad-On - H3C MSR 20-20 Command Reference Manual

Description
Example

default entity vad-on

Syntax
View
Parameter
Description
Related command:
Example
g729: Specifies the packetization period for g729 codec. It ranges from10 to 180
milliseconds and defaults to 30 milliseconds.
time-length: Packetization period for a codec.
Use the
default entity payload-size
packetization period for a codec.
Use the
undo default entity payload-size
# Set the packetization period for G.711 codec to 30 milliseconds.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] dial-program
[Sysname-voice-dial] default entity payload-size g711 30
default entity vad-on
undo default entity vad-on
Voice dial program view
None
Use the default entity vad-on
detection as the default value.
Use the
undo default entity vad-on
disabling the silence detection) to be the default value.
By default, the silence detection is disabled.
The default entity vad-on command is used to globally enable silence detection
and make it as the default setting. After the configuration, all the voice entities
and newly created voice entities on this router, which have not been configured
with this function, will inherit this configuration (note that G. 711 does not
support silence detection).
vad-on.
# Enable the silence detection globally.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] dial-program
[Sysname-voice-dial] default entity vad-on
command to configure the default
command to restore the default.
command to globally configure enabling silence
command to restore the fixed value (i.e.
2569