Apply Poe-Profile - H3C MSR 20-20 Command Reference Manual

166

apply poe-profile

Syntax
View
Parameter
Description
Related command:
Example
P E C
O ONFIGURATION
n
The support for the commands in this document varies with devices.
apply poe-profile { index index | name profile-name }
undo apply poe-profile { index index | name profile-name }
PoE interface view
index index: Specifies the index number of the PoE configuration file. The index
number ranges from 1 to 100.
name profile-name: Specifies the name of the PoE configuration file. The file
name consists of 1 to 15 characters.
Use the
apply poe-profile
current PoE interface.
Use the
undo apply poe-profile
PoE configuration file to the current PoE interface.
Note that the index number, instead of the name, of the PoE configuration file will
be displayed when you execute the display this command.
display poe-profile and apply poe-profile interface.
# Apply the PoE configuration file named A20 to the PoE interface Ethernet1/0.
<Sysname> system-view
[Sysname] interface ethernet 1/0
[Sysname-Ethernet1/0] apply poe-profile name A20
[Sysname-Ethernet1/0] display this
#
interface Ethernet1/0
port link-mode route
apply poe-profile index 1
#
C
OMMANDS
command to apply the PoE configuration file to the
command to remove the application of the