Authorization - H3C MSR 20-20 Command Reference Manual

View
Parameter
Description
Related command:
Example

authorization

Syntax
View
Parameter
Description
Voice AAA client view
None
Use the
authentication-did
all one-stage dialing users.
Use the undo authentication-did
function.
By default, the authentication function is disabled for all one-stage dialing users.
This command is applicable to only one-stage dialing users, instead of two-stage
dialing users.
With this function enabled, the calling number of one-stage dialing users who
want to make IP calls is sent to the RADIUS server for authentication. Only users
who pass authentication can make IP calls. Those who fail authentication will be
disconnected and cannot make IP calls.
The authentication function must be enabled before the authorization function.
When the authentication function is disabled, the authorization function will
automatically be disabled, and meanwhile, the authorization-did and undo
authorization-did commands will be unavailable.
authorization-did.
# Enable the authentication function for one-stage dialing users.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] aaa-client
[Sysname-voice-aaa] authentication-did
authorization
undo authorization
Access number view
None
Use the
authorization
who dial some access number.
Use the
undo authorization
By default, the authorization function is disabled for users who dial access
numbers.
command to enable the authentication function for
command to disable the authentication
command to enable the authorization function for users
command to disable the authorization function.
2725