Ipx Encapsulation; Ipx Netbios-Propagation - H3C MSR 20-20 Command Reference Manual

ipx encapsulation

Syntax
View
Parameter
Description
Example

ipx netbios-propagation

Syntax
View
Parameter
Description
ipx encapsulation [ dot2 | dot3 | ethernet-2 | snap ]
undo ipx encapsulation
Interface view
dot2: Specifies the encapsulation format as Ethernet_802.2.
dot3: Specifies the encapsulation format as Ethernet_802.3.
ethernet-2: Specifies the encapsulation format as Ethernet_II.
snap: Specifies the encapsulation format as Ethernet_SNAP.
Use the ipx encapsulation
format for the current interface.
Use the
undo ipx encapsulation
encapsulation format.
By default, IPX frame encapsulation format is dot3 (Ethernet_802.3).
The command is only applicable to the layer 3 Ethernet interface and the VLAN
interface.
# Specify the IPX frame encapsulation format on the interface 1/0 as Ethernet_II.
<Sysname> system-view
[Sysname] interface ethernet 1/0
[Sysname-Ethernet1/0] ipx encapsulation ethernet-2
ipx netbios-propagation
undo ipx netbios-propagation
Interface view
None
Use the
ipx netbios-propagation
the type 20 broadcast packets.
Use the
undo ipx netbios-propagation
forwarding the type 20 broadcast packets.
By default, type 20 broadcast packets are not forwarded.
command to specify an IPX frame encapsulation
command to restore the default IPX frame
command to enable the interface to forward
command to disable the interface from
2539