Display Voice Call-Info - H3C MSR 20-20 Command Reference Manual

2576 C 173: V IP C
HAPTER O
Description
Example

display voice call-info

Syntax
View
Parameter
Description
Example
C
ONFIGURATION OMMANDS
Use the dial-program
# Enter the dial program view
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] dial-program
display voice call-info { brief | mark tag | verbose }
Any view
brief: Displays the brief information of the call information table.
mark TAG: Displays the call information of the call information table by tag (in the
range of 0 to 127).
verbose: Displays the detailed information of the call information table.
Use the
display voice call-info
information table.
# Display the brief information of the call information table at a certain point of
time.
<Sysname> display voice call-info brief
The information table for current calls in brief
#
**************** CALL 0 ***************
ViIfIndex
Module ID
#
End
# Display the detailed information of the call information table at a certain point of
time.
<Sysname> display voice call-info verbose
The information table for current calls in detail
#
**************** CALL 0 ***************
Call direction
ViIfIndex
Related module ==>
Module ID
Reference Numbers : 2
Module ID
Reference Numbers : 1
Current used voice entity : 2961
Voice entities are offered :
#
End
command to enter the voice dial program view.
command to display the contents in the call
: 2884067
: LGS CMC
: From PSTN
: 2884067
: LGS
: CMC
2961