Wildcard-Register Enable - H3C MSR 20-20 Command Reference Manual

2709

wildcard-register enable

Syntax
wildcard-register enable
undo wildcard-register
View SIP client view
Parameter None
Description Use the command to enable fuzzy (wildcard)
wildcard-register enable
telephone number registration.
Use the undo wildcard-register command to disable fuzzy (wildcard) telephone
number registration.
By default, fuzzy telephone number registration is disabled.
When configuring a match template in a POTS entity, you may use a number
containing the wildcards of dot (.) and T instead of using a standard E.164
number. After enabling fuzzy telephone number registration, the router retains
the wildcard "." and substitutes the asterisk * for the wildcard T when sending
REGISTER messages.
You can use this command only when the SIP registration function is disabled.
n
You may use fuzzy telephone number registration only when it is supported on
both SIP SIP server and location server.
Example # Enable fuzzy telephone number registration.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] sip
[Sysname-voice-sip] wildcard-register enable