H3C MSR 20-20 Command Reference Manual page 2455

If the summary keyword is present, the command displays all the number and
type of user interfaces.
Example # Display information about user interface 0.
<Sysname> display user-interface 0
Idx Type
+ 0 CON 0
+ : Current user-interface is active.
F : Current user-interface is active and work in async mode.
Idx : Absolute index of user-interface.
Type : Type and relative index of user-interface.
Privi: The privilege of user-interface.
Auth : The authentication mode of user-interface.
Int : The physical location of UIs.
A : Authentication use AAA.
L : Authentication use local database.
N : Current UI need not authentication.
P : Authentication use current UI's password.
Table 634 Description on the fields of the display user-interface command
Field
+
F
Idx
Type
Tx/Rx
Modem
Privi
Auth
Int
# Display summary about all user interfaces.
<Sysname> display user-interface summary
User interface type : [CON]
User interface type : [TTY]
User interface type : [AUX]
User interface type : [VTY]
3 character mode users.
83 UI never used.
3 total UI in use
Tx/Rx Modem Privi Auth
9600 -
Description
The current user interface is active.
The current user interface is active and works in asynchronous mode.
The absolute number of the user interface.
The type and relative number of the user interface.
The speed of the user interface.
Whether the modem is allowed to dial in (in), dial out (out), or both (inout).
By default, the character - is displayed to indicate that this function is
disabled.
Indicates the command level of a user under that user interface.
The authentication mode, uses one of the following, AAA (A), current user
interface password (P), local database (L), none authentication (N).
The physical location of the user interfaces.
0:X
1:XXXX XXXX XXXX XXXX
17:XXXX XXXX XXXX XXXX
33:XXXX XXXX XXXX XXXX
49:XXXX XXXX XXXX XXXX
65:XXXX XXXX XXXX XXXX
81:X
82:XUXU U
Int
3 N -
(U)
(X)
2455