Oap Reboot Slot - H3C MSR 20-20 Command Reference Manual

2508 C 167: OAP M C C
HAPTER ODULE ONFIGURATION OMMANDS

oap reboot slot

Syntax
oap reboot slot slot-number
View User view
Parameter slot-number: Number of the slot where an OAP module locates.
Description Use the command to restart an OAP module, which equals to
oap reboot slot
resetting the OAP module by pressing the Reset button on the OAP module.
c
CAUTION: Before resetting an OAP module you are recommended to save the
data on Linux OS and shut down the Linux OS to avoid service interruption and
hardware data loss. After the reset, the Linux OS on the OAP module will be
automatically rebooted.
Related command: oap reload slot, oap shutdown slot.
Example # Restart the OAP module on slot 3.
<Sysname> oap reboot slot 3
This command will recover the OAP from shutdown or other failed state.
Warning: This command may lose the data on the hard disk if the OAP is not b
eing shut down!
Continue? [Y/N] y
Reboot OAP by command.